Are you in search of a comprehensive guide to the 1734 vhsc24 wiring diagram? If yes, then you have come to the right place. In this journal article, we will provide you with all the information you need to know about the wiring diagram for the 1734 vhsc24 module. You will learn about the module’s specifications, how to wire it correctly, and frequently asked questions about it. So, let’s dive in!
What is the 1734 vhsc24 module?
The 1734 vhsc24 module is a 24-channel voltage and current analog input module designed to work with Allen-Bradley’s CompactLogix and MicroLogix 1500 programmable controllers. It has a 24-bit resolution and a range of -10 to +10 volts DC or -20 to +20 mA DC for each channel. The module is ideal for applications that require high precision, such as process control and monitoring.
The 1734 vhsc24 module is compatible with Allen-Bradley’s CompactLogix and MicroLogix 1500 programmable controllers. It can be easily integrated into your current control system, making it a cost-effective solution for your automation needs.
The 1734 vhsc24 module has the following specifications:
|-10 to +10 V DC or -20 to +20 mA DC per channel
|±0.2% full scale
|1500 V AC for 1 minute
How to wire the 1734 vhsc24 module?
Wiring the 1734 vhsc24 module is a straightforward process. In this section, we will provide you with step-by-step instructions on how to wire the module correctly. Before you begin, make sure that you have the following items:
- A 1734-VHSC24 module
- A 1734-TOPS module
- A 1734-TB3 or 1734-TB3S terminal base
- A power supply
- A CompactLogix or MicroLogix 1500 programmable controller
- An Ethernet cable
- A PC with the RSLogix 5000 software installed
Step 1: Install the 1734-TB3 terminal base
The first step is to install the 1734-TB3 or 1734-TB3S terminal base. To do this, follow these steps:
- Locate the mounting holes on the terminal base and mount it to a flat surface using screws.
- Insert the module into the terminal base until it clicks into place. The module’s power indicator LED should light up green.
Step 2: Check the module’s dip switch settings
Before you begin wiring the module, make sure that its dip switch settings are correct. The dip switch settings can be found on the module’s label. Set the dip switches to the appropriate positions for your application.
Step 3: Connect the power supply
The next step is to connect the power supply. To do this, follow these steps:
- Locate the power supply connector on the terminal base and insert the power supply wires into the connector.
- Connect the power supply to a power source.
Step 4: Connect the Ethernet cable
Connect the Ethernet cable to the module’s Ethernet port and to a network switch. This will allow you to communicate with the module using the RSLogix 5000 software.
Step 5: Wire the analog inputs
The final step is to wire the module’s analog inputs. To do this, follow these steps:
- Locate the channel connectors on the terminal base and insert the analog input wires into the appropriate connectors.
- Connect the other end of the wires to the sensors or devices that you are monitoring.
FAQ about the 1734 vhsc24 module
Q: What is the maximum distance between the 1734 vhsc24 module and the sensors?
A: The maximum recommended distance between the module and the sensors is 100 meters.
Q: Can the 1734 vhsc24 module be used with the ControlLogix programmable controller?
A: No, the module is not compatible with the ControlLogix programmable controller.
Q: Does the 1734 vhsc24 module require an external power supply?
A: Yes, the module requires an external power supply. The power supply voltage should be between 10 and 30 volts DC.
Q: What is the module’s sampling rate?
A: The module’s sampling rate is 1.33 milliseconds per channel.
Q: How many modules can be connected to a CompactLogix or MicroLogix 1500 programmable controller?
A: Up to 16 modules can be connected to a CompactLogix or MicroLogix 1500 programmable controller.
By now, you should have a good understanding of the 1734 vhsc24 wiring diagram. We have covered everything from the module’s specifications to how to wire it correctly. We have also provided you with frequently asked questions about the module. If you have any other questions, please consult the module’s user manual or contact Allen-Bradley’s technical support.